Roof Installation
A new roof installation is different from a replacement in one important way: there is no existing s...
A new roof installation is different from a replacement in one important way: there is no existing system to work around, work with, or work against. The material, ventilation design, and installation system are all chosen from scratch. That decision, made once at the beginning of construction, determines what you will live with for the next 25 to 50 years.
We install roofs on new construction projects throughout Monroe County, from infill homes near Indiana University to new commercial builds on the city’s outskirts. We provide free estimates, written scopes, and handle the permitting process from start to finish. Call us at (812) 327-2885.
We handle roof installation when the system is being built from the structure up, not simply replacing an aging roof on an existing home. If you are replacing a failing roof on an existing structure, our roof replacement service is the better fit. This page is for building from scratch, adding a new structure, or completing a structural rebuild where the decking itself is being replaced as part of new construction or a major addition.
New residential construction includes homes built from the ground up, with the roof system designed to match the architectural plans, framing, ventilation requirements, and long-term material goals.
Additions and outbuildings include garages, workshops, room additions, covered structures, and other projects that need a new roofline integrated with or separated from the existing structure.
New commercial construction includes light industrial buildings, mixed-use properties, and commercial buildings throughout Bloomington and Monroe County. At AMI Roofing Contractors, we install shingle roofing, metal roofing, and flat roofing systems on new commercial builds.
Structural rebuilds apply when the existing decking must be replaced along with all roofing layers. In that case, the project is treated as a roof installation from the sheathing up, not a standard replacement.
New construction roofing depends on timing. The roofing crew needs to arrive after framing and sheathing are complete and inspected, then complete the roof before other trades are delayed from working inside the structure. At AMI Roofing Contractors, we coordinate directly with builders and general contractors throughout Bloomington and Monroe County to fit the roofing scope into the construction schedule.
Before providing an estimate, we review the construction documents, roofing specifications, ventilation requirements, flashing transitions, penetration count, and material selections. If the project would benefit from an upgrade, such as Class 4 impact-resistant shingles, heavier underlayment, improved ridge ventilation, or extended ice and water shield, that recommendation is explained clearly with the cost difference.
Before the first layer of roofing material goes on, we confirm the roof decking or structural sheathing is dry, correctly fastened, and ready for the roofing product being installed. Sheathing readiness matters because the roof system can only perform as well as the structure beneath it.
We also coordinate Monroe County inspections so builders and GCs do not have to manage scheduling separately, while homeowners preparing for closing can use a roof inspection to confirm the completed system is documented and ready.
Builders and general contractors working in Bloomington and Monroe County can request a scope review and written estimate from us at any project stage. Call us at (812) 327-2885 or email info@amiroofs.com.
Every new roof installation starts with the structure, not just the final roofing material. We review the architectural plans or inspect the structure, discuss material options for the climate and budget, and provide a written itemized estimate before work is committed.
We handle the Monroe County permit application and coordinate inspection scheduling as part of the project. Builders and GCs do not need to manage this step separately when the roofing scope is handled by us.
If decking installation is part of the project, OSB sheathing or plywood panels are installed according to the structural engineer’s specification. Span rating and fastening pattern are confirmed before roofing begins.
Attic ventilation is designed before the roof is closed in. Soffit vent placement is confirmed with framing, and ridge vent sizing is calculated before the final roofing material is installed. New construction is the best opportunity to get ventilation right because the system is designed in, not retrofitted later.
Drip edge is installed at the eave edge before ice and water shield. Self-adhering ice and water shields are installed at eaves, valleys, and penetrations, including the first 3-6 feet where Indiana freeze-thaw conditions create the highest risk for moisture intrusion.
Synthetic underlayment is installed over the remaining deck surface as the secondary water barrier. Drip edge is then installed at the rake edges in the correct sequence over the underlayment.
Valley flashing, step flashing, pipe boots, and penetration flashing are installed at roof intersections, roof-to-wall transitions, and all penetrations. These details matter on new construction because they prevent the common leak points that often show up years later.
The final roofing material is installed to the applicable manufacturer’s specifications, including correct nailing pattern, exposure, starter strip sequence, and fastening requirements. At AMI Roofing Contractors, we install architectural shingles, standing seam metal roofing, and commercial flat roofing systems depending on the project type.
Continuous ridge vent is cut, sheathed, and installed before ridge cap shingles are completed. The site is cleaned, the finished roof is reviewed with the homeowner or GC representative, and warranty documentation is registered.
New construction roofing in Monroe County needs to account for Indiana weather from the design stage. Bloomington’s spring storm season, freeze-thaw cycles, and summer humidity all affect which roofing materials and installation details make sense.
Monroe County’s spring storm season, especially April through June, makes wind resistance an important specification. New construction roofing should be specified to Class F 130 mph wind resistance at minimum where applicable. Architectural shingles with enhanced wind ratings are available and are worth considering before the roof is installed.
Ice and water shields are required at the eave by Indiana building code. In Monroe County’s freeze-thaw climate, extending coverage beyond the minimum to the first warm wall line in the attic can provide added protection at a relatively low cost during installation.
Attic ventilation is another major new construction decision. Bloomington’s summer relative humidity regularly exceeds 70%, and a ventilation system that may be adequate in a dry climate can underperform here. At AMI Roofing Contractors, we calculate ventilation to the 1:150 ratio on new construction to support airflow through Indiana’s humid summers.
New construction also gives homeowners and builders a chance to avoid minimum-code choices that may cost more later. Builder-grade roofing products can manage upfront cost, but we advise where upgrades provide the most long-term value, including Class 4 impact shingles, better underlayment, extended ice and water shield, and stronger ventilation design.
Architectural asphalt shingles are the most common choice for residential new construction in Bloomington. CertainTeed Landmark systems and Class 4 impact-resistant options can be selected from the start, instead of treated as a later upgrade.
Standing seam metal roofing is increasingly common on Bloomington new construction because it offers a longer service life, concealed fasteners, and strong performance through Indiana freeze-thaw cycles.
For commercial new construction, we install TPO, EPDM, and other flat roofing systems where the building design calls for low-slope or no-slope roofing.
At AMI Roofing Contractors, we install new roofing systems throughout Bloomington, Ellettsville, Martinsville, Bloomfield, Spencer, Nashville, Bedford, Mooresville, and throughout Monroe County.
We install roofs on new construction projects in Bloomington and Monroe County. We have completed more than 1,000 roofing projects in this area, including residential and commercial new builds throughout Monroe County.
We have worked with builders and general contractors on new construction projects throughout Monroe County, from infill residential projects near Indiana University to commercial builds along the SR 37 and SR 46 corridors. We understand construction schedules, coordinate directly with building inspectors, and show up when we say we will.
We hold the CertainTeed SELECT ShingleMaster certification, one of fewer than 1% of US roofing contractors to hold that designation. For new construction, that certification matters because every qualifying new installation can activate the CertainTeed SureStart PLUS warranty from day one.
We are also A+ BBB Accredited with zero complaints on record, a four-time Best of the Best award winner, members of the Greater Bloomington Chamber of Commerce, and rated 5 stars on Google.
Written scope. Permit included. No surprises at the invoice. Call (812) 327-2885 or email info@amiroofs.com for a free roof installation estimate.
Roof installation starts with reviewing the plans or structure, confirming decking readiness, designing ventilation, pulling the Monroe County permit, installing waterproofing layers, completing flashing details, and installing the final roofing material. On new construction, ventilation is designed in from the start instead of added later.
Yes. We work directly with builders and general contractors throughout Bloomington and Monroe County. The roofing schedule, written scope, permit coordination, inspection timing, material specifications, and jobsite communication are aligned with the broader construction schedule.
We provide written estimates with clear material and installation scope before work begins.
Yes. We handle Monroe County permit applications and inspection coordination for new construction roofing projects. Builders, general contractors, and homeowners do not need to manage that step separately when we are handling the roof installation.
Architectural shingles are the most common choice for residential new construction in Bloomington because they balance cost, durability, and design flexibility. Standing seam metal roofing is growing in popularity because of its long lifespan, concealed fasteners, and freeze-thaw performance. Commercial new construction projects often use TPO, EPDM, or other flat roofing systems depending on the building design.
The three most common roofing categories are architectural asphalt shingles, metal roofing, and flat roofing systems. Architectural shingles are most common for residential new construction in Bloomington, standing seam metal is often chosen for longer-term durability, and flat roofing systems are used for commercial buildings and low-slope roof designs.
Building a new home, adding a structure, or working on a new construction project in Bloomington or Monroe County? At AMI Roofing Contractors, we install residential and commercial roofing systems from the decking up, including shingles, metal, and flat roofing. Permits handled. Written scope provided. Free estimate.
Call us at (812) 327-2885 or email info@amiroofs.com. AMI Roofing Contractors is based at 3802 Industrial Blvd # 1, Bloomington, IN 47403.
Monday – Friday: 8:30 AM – 4:30 PM
Saturday: By Appointment
Sunday: Closed
